Brocade Communications Systems StoreFabric SN6500B Reference page 686

5
PSWP-1001
PSWP Messages
PSWP-1001
Message
PID for port <wwn name corresponding to source port> and port <wwn name
corresponding to destination port> are swapped. New PID for port <wwn name
corresponding to source port> is 0x<wwn name corresponding to destination port>
and port <new area corresponding to source wwn> is 0x<new area corresponding to
destination wwn>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates the portSwap command has been issued.
Recommended
No action is required.
Action
PSWP-1002
Message
Port Swap feature enabled.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates the port swap feature has been enabled in the switch.
Recommended
No action is required.
Action
PSWP-1003
Message
Port Swap feature disabled.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates the port swap feature has been disabled in the switch.
Recommended
No action is required.
Action
664
Fabric OS Message Reference
53-1002749-01