Brocade Communications Systems StoreFabric SN6500B Reference page 915

Recommended
No action is required.
Action
ZONE-1007
Message
Ioctl (<function>) in (<error message>) at port (<port number>) returns code
(<error string>) and reason string (<reason string>).
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that frame filter logic reported a failure during the specified I/O Control (IOCTL) call. This is
usually a programming error when adding CAM entries before the filter setup.
Recommended
Avoid this problem in the following ways:
Action
•
•
ZONE-1010
Message
Duplicate entries in zone (<zone name>) specification.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that there are duplicate entries in the specified zone object. This message occurs only when
enabling a zone configuration.
Recommended
Check the members of the zone using the cfgShow command. Delete the duplicate member using the
Action zoneRemove command.
ZONE-1013
Message
QuickLoop not supported.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the QuickLoop feature is not supported in the current version of Fabric OS. QuickLoop
zones are not supported in Fabric OS version 4.x or later. Even if the QuickLoop zoning configuration is
enabled on the switch, it will not be supported.
Recommended
Edit the zone database to remove the QuickLoop zoning definition in the effective configuration.
Action
Fabric OS Message Reference
53-1002749-01
Avoid having too many hosts zoned with a set of target devices at a single port.
Avoid having too many zones directed at a single port group on the switch.
5
ZONE-1007
893