5
SEC-1090
SEC-1090
Message
SCC list contains FCS member. Please remove member from the FCS policy first.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates a corruption occurred during the distribution of the security database. This can only occur when
the primary fabric configuration server (FCS) distributes the security database to the other switches in
the fabric, and then local validation finds the error in the security database. This is a rare occurrence.
Recommended
Run the fabricShow command to verify that the fabric is still consistent. All the switches should be in the
Action
ready state. If a switch is in the error state, the database may not be correctly updated for that specific
switch.
SEC-1091
Message
No policy to remove.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates the specified policy member does not exist or the policy itself does not exist.
Recommended
Verify that the security policy name or member ID is correct.
Action
SEC-1092
Message
<Policy name> Name not found.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates a corruption occurred during the distribution of the security database. This can only occur when
the primary fabric configuration server (FCS) distributes the security database to the other switches in
the fabric, and then local validation finds the error in the security database. This is a rare occurrence.
Recommended
Run the fabricShow command to verify that the fabric is still consistent. All the switches should be in the
Action
ready state. If a switch is in the error state, the database may not be correctly updated for that specific
switch.
710
Fabric OS Message Reference
53-1002749-01