Brocade Communications Systems StoreFabric SN6500B Reference page 666

5
PDM-1007
PDM-1007
Message
File not created: <file name>. errno=<errno>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the Parity Data Manager (PDM) process failed to create the specified file.
Recommended
Execute the firmwareDownload command to reinstall the firmware.
Action
If the message persists, execute the supportFtp command (as needed) to set up automatic FTP
transfers; then execute the supportSave command and contact your switch service provider.
PDM-1008
Message
Failed to get the number of U_Ports.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the Parity Data Manager (PDM) system call to getCfg failed.
Recommended
Execute the firmwareDownload command to reinstall the firmware.
Action
If the message persists, execute the supportFtp command (as needed) to set up automatic FTP
transfers; then execute the supportSave command and contact your switch service provider.
PDM-1009
Message
Can't update Port Config Data.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the Parity Data Manager (PDM) system call to setCfg failed.
Recommended
Execute the firmwareDownload command to reinstall the firmware.
Action
If the message persists, execute the supportFtp command (as needed) to set up automatic FTP
transfers; then execute the supportSave command and contact your switch service provider.
644
Fabric OS Message Reference
53-1002749-01