Brocade Communications Systems StoreFabric SN6500B Reference page 853

TABLE 8
Error message
"Out of memory."
"Failed to download RPM package."
"Unable to create firmware version file."
"Unexpected system error."
"Error in getting lock device for firmware download."
"Error in releasing lock device for firmware download."
"Firmware commit failed."
"Firmware directory structure is not compatible. Check whether the firmware is
supported on this platform."
"Failed to load the Linux kernel image."
"OSLoader is inconsistent."
"New image has not been committed. Run the
firmwareRestore
"Firmware restore failed."
"Both images are mounted to the same device."
"Unable to uninstall old packages."
"Firmware download is already in progress."
"Firmware download timed out."
"Out of disk space."
"Primary filesystem is inconsistent. Run the
the original firmware, or contact your switch service provider for recovery."
"The post-install script failed."
"Unexpected reboot."
"Primary kernel partition is inconsistent. Contact your switch service provider for
recovery."
"The pre-install script failed."
"The platform option is not supported."
"Failed to install RPM package."
"Cannot downgrade directly to this version. Downgrade to an intermediate version
and then download the desired version."
"Invalid RPM package. Reload firmware packages on the file server."
"Cannot downgrade due to presence of blade type 17. Remove or power off these
blades before proceeding."
"Cannot downgrade due to presence of blade type 24. Remove or power off these
blades before "
"Cannot downgrade due to presence of long-distance ports in LS mode. Remove
these settings before proceeding."
"Network is not reachable. Verify the IP address of the server is correct."
Fabric OS Message Reference
53-1002749-01
Error messages and error codes (Continued)
command and then run the
firmwareCommit
or
firmwareDownload
command."
firmwareRestore command to restore
5
SULB-1009
Error code
0x14
0x15
0x16
0x17
0x18
0x19
0x1a
0x1b
0x1c
0x1d
0x1e
0x1f
0x20
0x21
0x22
0x23
0x24
0x25
0x26
0x27
0x28
0x29
0x2a
0x2b
0x2c
0x2e
0x2f
0x30
0x31
0x32
831