Brocade Communications Systems StoreFabric SN6500B Reference page 402

5
FICN-1021
FICN-1021
Message
DevTapeEgr:FICON Tape Cancel:Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> Elapsed Time=<the current SIO
time in seconds for the device>.<the current SIO time in milliseconds for the
device> seconds.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates the FICON channel issued a Cancel sequence for a device in emulation.
Recommended
If there was an unexpected job failure associated with this event, contact your vendor's customer support
Action for assistance.
FICN-1022
Message
DevTapeEgr:FICON Selective Reset:Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> State=0x<the current state of
the device that received the selective reset> statArray=0x<the last 4 status
values received from the device> cmdArray=0x<the last 4 commands that were issued
to the device> tflags=0x<the current emulation tape control flags for the device>
sflags=0x<the current emulation status control flags for the device>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates the FICON channel issued a Selective Reset for a device that was active in emulation.
Recommended
If there was an unexpected job failure associated with this event, contact your vendor's customer support
Action for assistance.
FICN-1023
Message
DevTapeEgr:FICON Selective Reset:Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> Elapsed Time=<the current SIO
time in seconds for the device>.<the current SIO time in milliseconds for the
device> seconds.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates the FICON channel issued a Selective Reset sequence for a device.
Recommended
If there was an unexpected job failure associated with this event, contact your vendor's customer support
Action for assistance.
380
Fabric OS Message Reference
53-1002749-01