Brocade Communications Systems StoreFabric SN6500B Reference page 317

EM-1070
Message
Slot <FRU slot number> is being powered on.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the blade in the specified slot is being intentionally powered on.
Recommended
No action is required.
Action
EM-1071
Message
Unit in <Slot number> with ID <FRU Id> is faulted, it is incompatible with the
following blade id(s): <blade incompatibility list>.
Message Type
FFDC | LOG
Severity
CRITICAL
Probable Cause
Indicates that a blade inserted in the specified slot is incompatible with another blade in the system.
Recommended
Determine which blade is essential to your configuration and remove blades that are incompatible with it.
Action
EM-1072
Message
Chassis cannot become ready since no Core Blades are available.
Message Type
FFDC | LOG
Severity
CRITICAL
Probable Cause
Indicates that all core blades are either missing, faulted, or powered off. There must be at least one core
blade in enabled state for the chassis to be considered ready.
Recommended
Insert and close the ejector switch on missing core blades. Reseat or replace core blades that are faulted
Action or powered off.
Fabric OS Message Reference
53-1002749-01
5
EM-1070
295