Brocade Communications Systems StoreFabric SN6500B Reference page 463

FW-1010
Message
<Label>, is below low boundary(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the power supply is faulty. The power supply is not producing enough power.
Recommended
Verify that you have installed the power supply correctly and that it is correctly seated in the chassis. If
Action the problem persists, replace the faulty power supply.
FW-1011
Message
<Label>, is above high boundary(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the power supply is functioning properly.
Recommended
Set the high boundary above the normal operation range.
Action
FW-1012
Message
<Label>, is between high and low boundaries(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the power supply counter changed from a value outside of the acceptable range to a value
within the acceptable range.
Recommended
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
Action installation.
Fabric OS Message Reference
53-1002749-01
5
FW-1010
441