Brocade Communications Systems StoreFabric SN6500B Reference page 557

FW-1535
Message
Fabric Watch has stopped portfencing feature for <Area String> loss area in <Port
Name> class since FOS6.3. Disabling port fencing feature for this.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that Port Fencing is configured for link loss and synchronization loss in previous versions, but
upgrading to a new version resets the bit because Port Fencing is not supported.
Recommended
No action is required. You are informed that the Port Fencing bit is reset.
Action
FW-2000
Message
FW Monitoring is disabled since MAPS is enabled.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that Fabric Watch is not monitoring the switch because MAPS is enabled.
Recommended
Verify that the event was planned.
Action
FW-3001
Message
Event: <Event Name>, Status: success, Info:<Event Related Info>.
Message Type
AUDIT
Class
CFG
Severity
INFO
Probable Cause
Indicates that Port Fencing was enabled or disabled successfully.
Recommended
No action is required.
Action
Fabric OS Message Reference
53-1002749-01
5
FW-1535
535