Brocade Communications Systems StoreFabric SN6500B Reference page 639

MS Messages
MS-1001
Message
MS Platform Segmented port=<port number> (0x<port number (hex)>) (<reason for
segmentation> <domain> (0x<domain (hex)>)).
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the Management Server (MS) has segmented from another switch domain at the specified
port because of errors or inconsistencies defined in the MS platform service.
Recommended
Reboot or power cycle the switch.
Action
MS-1002
Message
MS Platform Service Unstable(<message string><domain number>).
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the Management Server (MS) platform service is unstable.
The message string value can be one of the following:
•
•
•
•
The domain number is the target domain that caused the error.
Recommended
The recommended actions are as follows:
Action
•
•
•
•
Fabric OS Message Reference
53-1002749-01
No Resp for GCAP from: The switch did not respond to a request for a GCAP (MS Get
Capabilities) command.
GCAP sup but not PL by: GCAP is supported but the flag for MS platform service is not set.
GCAP Rejected (reason =BUSY) by: GCAP is not supported by another switch.
Reject EXGPLDB from: The request to the exchange platform database was rejected. The
remote switch may be busy.
No Resp for GCAP from: No action is required.
GCAP sup but not PL by: Set the flag for the MS platform service.
GCAP Rejected (reason =BUSY) by: Execute the
firmware level on the switch to a level that supports reliable commit service (RCS). RCS is
supported in Fabric OS v2.6, v3.1 and later, and v4.1 and later.
Reject EXGPLDB from: Wait a few minutes and try the command again.
command to upgrade the
firmwareDownload
5
MS-1001
617