Brocade Communications Systems StoreFabric SN6500B Reference page 744

5
SEC-1138
SEC-1138
Message
Security database download received from Primary FCS.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that a non-primary fabric configuration server (FCS) switch received a security database
download.
Recommended
Verify that the security event was planned. If the security event was planned, no action is required. If the
Action security event was not planned, take appropriate action as defined by your enterprise security policy.
SEC-1139
Message
The RSNMP_POLICY cannot exist without the WSNMP_POLICY.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the receiving switch failed to validate the security database sent from the primary fabric
configuration server (FCS) switch. This message usually indicates that the data package is corrupted,
the time stamp on the package is out of range as a result of a replay attack or out-of-sync time service, or
the signature verification failed. Signature verification failure indicates either an internal error (such as
losing the primary public key) or an invalid database.
Recommended
Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in
Action the ready state. If a switch is in the error state, the database may not be correctly updated for that switch.
This message may also be the result of an internal corruption or a hacker attack to the secure fabric.
SEC-1142
Message
Reject new policies. <reason text>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates the new polices are rejected because of the reason specified.
Recommended
Use proper syntax when entering policy information.
Action
722
Fabric OS Message Reference
53-1002749-01