Brocade Communications Systems StoreFabric SN6500B Reference page 473

Recommended
Verify that the cable is properly connected at both ends. Verify that the small form-factor pluggables
Action (SFPs) have not become faulty. An inexplicable fabric reconfiguration might be a transient error and
might not require troubleshooting.
FW-1118
Message
<Label>, is below low boundary(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the number of fabric reconfigurations has fallen below the low boundary. The following
occurrences can cause a fabric reconfiguration:
•
•
•
•
A low number of fabric reconfigurations means that the fabric is functioning normally.
Recommended
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
Action installation.
FW-1119
Message
<Label>, is above high boundary(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the number of fabric reconfigurations has risen above the high boundary. The following
occurrences can cause a fabric reconfiguration:
•
•
•
•
Recommended
Verify that all inter-switch link (ISL) cables are properly connected at both ends. Verify that the small
Action form-factor pluggable (SFP) has not become faulty. An inexplicable fabric reconfiguration might be a
transient error and might not require troubleshooting.
Fabric OS Message Reference
53-1002749-01
Two switches with the same domain ID have connected to one another.
Two fabrics have joined.
An E_Port has gone offline.
A principal link has segmented from the fabric.
Two switches with the same domain ID have connected to one another.
Two fabrics have joined.
An E_Port has gone offline.
A principal link has segmented from the fabric.
5
FW-1118
451