Brocade Communications Systems StoreFabric SN6500B Reference page 902

Brocade fabric os message reference v7.1.0 (53-1002749-01, march 2013)

Hide thumbs Also See for StoreFabric SN6500B:

Table of Contents

FCIP Tunnel <VE Port (Tunnel) Number> Message Transmission failed:I/T/L/E:<FC

Initiator ID>/<FC Target ID>/<FCP Logical Unit Number>/<Error return value>.

Message Type

Probable Cause

Indicates a message transmission failure.

If there was an unexpected job failure associated with this event, contact your vendor's customer support

for assistance.

FCIP Tunnel <VE Port (Tunnel) Number> Exchange aborted:I/T/L:<FC Initiator ID>/<FC

Target ID>/<FCP Logical Unit Number>.

Message Type

Probable Cause

Indicates that the Fibre Channel Protocol (FCP) exchange has been aborted by the initiator.

If there was an unexpected job failure associated with this event, contact your vendor's customer support

for assistance.

FCP emulation for Tunnel/Initiator/Target/LUN:<VE Port (Tunnel) Number>/<FC

Initiator ID>/<FC Target ID>/<FCP Logical Unit Number> may not be optimal.

Message Type

Probable Cause

Indicates that the Fibre Channel Protocol (FCP) emulation is in FastWrite mode and could also be in

Tape Pipelining mode.

For disk devices, no action is required. For tape devices, device rediscovery is required.

Fabric OS Message Reference

53-1002749-01

Fabric os v7.1.0