Brocade Communications Systems StoreFabric SN6500B Reference page 168

5
AUTH-1007
AUTH-1007
Message
The proposed authentication protocol(s) are not supported: port <port number>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the proposed authentication protocol types are not supported by the specified local port.
Recommended
Execute the authUtil command to make sure the local switch supports the Fibre Channel Authentication
Action Protocol (FCAP) or Diffie Hellman - Channel Authentication Protocol (DH-CHAP) protocols.
AUTH-1008
Message
No security license, operation failed.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the switch does not have a security license.
Recommended
Verify that the security license is installed using the licenseShow command. If necessary, reinstall the
Action license using the licenseAdd command.
AUTH-1010
Message
Failed to initialize security policy: switch <switch number>, error <error code>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates an internal problem with the Secure Fabric OS.
Recommended
Reboot or power cycle the switch.
Action
If the message persists, execute the supportFtp command (as needed) to set up automatic FTP
transfers; then execute the supportSave command and contact your switch service provider.
146
Fabric OS Message Reference
53-1002749-01