Brocade Communications Systems StoreFabric SN6500B Reference page 200

5
BL-1047
BL-1047
Message
Buffer optimized mode is turned <buffer optimized mode> for slot <slot number>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the buffer optimized mode is changed for the specified slot.
Recommended
No action is required.
Action
BL-1048
Message
FCoE Blade in slot <Slot> failed because the Interop mode is enabled on the
switch.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the interop mode is turned on in the default switch while powering on the FCoE blade.
Recommended
Disable the interop mode using the interopmode command; then execute the slotPowerOff and
Action slotPowerOn commands on the FCoE blade.
BL-1049
Message
Serdestunemode: <serdestuning mode>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the SerDes tuning mode is changed for the slot.
Recommended
No action is required.
Action
178
Fabric OS Message Reference
53-1002749-01