Recommended
Run the secCertUtil show -fcapall command to verify that all PKI objects are valid. If PKI objects are not
Action
valid, generate the PKI objects and install the certificate by following the field upgrade process.
SEC-1065
Message
Invalid character in list.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates the input list has an invalid character.
Recommended
Enter valid input.
Action
SEC-1069
Message
Security Database is corrupted.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates the security database is corrupted for unknown reasons.
Recommended
Execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the
Action
supportSave command and contact your switch service provider.
SEC-1071
Message
No new security policy data to apply.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that no changes in the defined security policy database need to be activated at this time.
Recommended
Verify that the security event was planned. First change some policy definitions, and then run the
Action
secPolicyActivate command to activate the policies.
Fabric OS Message Reference
53-1002749-01
5
SEC-1065
703