Brocade Communications Systems StoreFabric SN6500B Reference page 918

5
ZONE-1026
ZONE-1026
Message
port <port number> Out of CAM entries.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the total number of entries of S_ID CAM is above the limit while creating or adding a zone
group. The maximum number of CAM entries allowed depends on the application-specific integrated
circuit (ASIC).
Recommended
If hardware zoning enforcement is preferred, edit the zoning database to have zoned port IDs (PIDs) for
Action that port.
ZONE-1027
Message
Zoning transaction aborted <error reason>. <AD Id>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates the zoning transaction was aborted because of a variety of potential errors. The error reason
variable can be one of the following conditions:
•
•
•
•
•
•
•
•
Most of these error conditions are transitory.
Recommended
Try again after some time. Verify that only one administrator is modifying with the zone database at a
Action time.
896
Zone Merge Received: The fabric is in the process of merging two zone databases.
Zone Config update Received: The fabric is in the process of updating the zone database.
Bad Zone Config: The new configuration is not viable.
Zoning Operation failed: A zoning operation failed.
Shell exited: The command shell has exited.
Unknown: An error was received for an unknown reason.
User Command: A user aborted the current zoning transaction.
Switch Shutting Down: The switch is currently shutting down.
Fabric OS Message Reference
53-1002749-01