Brocade Communications Systems StoreFabric SN6500B Reference page 848

5
SULB-1004
Recommended
No action is required. Run the firmwareDownloadStatus command for more information.
Action
SULB-1004
Message
Firmwarecommit has completed.
Message Type
AUDIT | LOG
Class
FIRMWARE
Severity
INFO
Probable Cause
Indicates that the firmwareCommit command has completed successfully.
Recommended
No action is required. Run the firmwareDownloadStatus command for more information.
Action
SULB-1005
Message
Current Active CP is preparing to failover.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the active control processor (CP) is about to reboot. The standby CP is taking over as the
active CP.
Recommended
No action is required. The firmwareDownload command is progressing as expected.
Action
Run the firmwareDownloadStatus command for more information.
SULB-1006
Message
Forced failover succeeded. New Active CP is running new firmware.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the previous standby control processor (CP) has now become the active CP and is running
the new firmware version.
Recommended
No action is required. The firmwareDownload command is progressing as expected.
Action
Run the firmwareDownloadStatus command for more information.
826
Fabric OS Message Reference
53-1002749-01