Brocade Communications Systems StoreFabric SN6500B Reference page 472

5
FW-1115
FW-1115
Message
<Label>, is above high boundary(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the number of times E_Ports have gone down has risen above the high boundary. E_Ports
go down each time you remove a cable or small form-factor pluggable (SFP). SFP failures also cause
E_Ports to go down. Down E_Port may be caused by transient errors.
Recommended
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
Action installation. Check both ends of the physical connection and verify that the SFP functions properly.
FW-1116
Message
<Label>, is between high and low boundaries(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the number of times E_Ports have gone down has changed from a value outside of the
acceptable range to a value within the acceptable range. E_Ports go down each time you remove a cable
or small form-factor pluggable (SFP). SFP failures also cause E_Ports to go down. Down E_Port may be
caused by transient errors.
Recommended
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
Action installation.
FW-1117
Message
<Label>, value has changed(High=<High value>, Low=<Low value>). Current value is
<Value> <Unit>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the number of fabric reconfigurations has changed. The following occurrences can cause a
fabric reconfiguration:
•
•
•
•
450
Two switches with the same domain ID have connected to one another.
Two fabrics have joined.
An E_Port has gone offline.
A principal link has segmented from the fabric.
Fabric OS Message Reference
53-1002749-01