Brocade Communications Systems StoreFabric SN6500B Reference page 235

CDR-1022
Message
S<slot number>,P<port number>(<blade port number>): Link Timeout on External port,
ftx=<frame transmitted> tov=<real timeout value> (><expected timeout value>)
vc_no=<vc number> crd(s)lost=<Credit(s) lost>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that above-normal errors are observed in hardware that may or may not impact the data traffic.
Recommended
When this error is observed persistently, power cycle the specified blade using the slotPowerOff and
Action slotPowerOn commands. If the problem persists, replace the blade.
CDR-1028
Message
Detected excessive Link resets on the port in a second. Slot <slot number>, Port
<port number>(<blade port number>).
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the port received excessive link resets from peer port within 1 second and that exceeded
threshold.
Recommended
When this error is observed persistently, change the small form-factor pluggable (SFP) transceiver or the
Action cable on the peer port to which this port is connected.
Fabric OS Message Reference
53-1002749-01
5
CDR-1022
213