Radiator Reserve Tank - Honda INTERCEPTOR 2002 Service Manual

INSTALLATION
Be careful nor c o
Place the radiator onto the frame and connect the
damage the rad1 ator
upper and lower radiator hoses.
core. Tighten the clamp screws securely.
Install the left radiator onto the frame boss, then
install the collar and mounting bolt.
Tighten t he mounting bolt securely.
Install the radiator lower bracket and tighten the
bolt securely.
Tighten the hose clamp screws securely.
Connect the fan motor sub-harness 2P (Black) con-
nector.
Connect the air bleed hose to the right radiator.
Place the right radiator onto the frame, connect the
upper and lower radiator joint hoses and fi ll er neck
joint hose.
Install the ri ght radiator onto the fram e boss, t hen
install the collar and mounting bolt.
Tighten the mounting bolt securely.
Install the radiator lower bracket and tighten the
bolt securely.
Tighten the hose clamp screws securely.
Fill the system w ith recommended coolant (page 6-
6).
Install the inner half cowl and side cowl (page 2-10).
RADIATOR RESERVE TANK
REMOVAL/INSTALLATION
Remove the side cowl (page 2-8).
Remove the radiator reserve tank mounting bolts.
Remove the reserve tank from the frame, drain the
coolant from the filler neck.
Disconnect the overflow and siphon hose from the
reserve tank.
COOLING SYSTEM
BOLT/COLL~
6-17