Honda INTERCEPTOR 2002 Service Manual page 279

CYLINDER HEAD/ VALVES
Suspend the cam
chain with a piece
of wire to prevent
the chain from fall-
ing into the crank-
case.
8-16
Turn the rear cylinder cam chain tensioner lifter
shaft fully in (clockwise) and secu re it using the
stopper tool.
Th is tool can easi ly be made from a th in (1 mm
thickness) piece of steel (page 8- 13).
Remove the bolts and cam chain guide B.
Remove the cam pulse generator rotor and cam
sprockets from the camshaft.
Loosen and remove the camshaft holder B bolts
g radua lly in several steps and remove the camshaft
holder B.
Loosen the cam shaft holder A bolts and then
remove t he camshaft holder A.
I
NOTICE
From outside to inside, loosen the bolts in a criss-
cross pattern in several steps or the camshaft holder
might break.
Do not fo rcibly remove the dowel pins from the
camshaft holder.
Remove the joint collars and 0-rings f rom the rear
cylinder head.
Remove the rear cylinder camshaft.
STOPPER TOOL