Trim Clips - Honda INTERCEPTOR 2002 Service Manual

FRAME/ BODY PANELS/ EXHAUST SYSTEM
TRIM CLIPS
REMOVAL
Push the center of the trim clip pin.
Remove the trim clip.
NSTALLATION
Raise the center pin by pushing the retaining tabs
back.
Install the trim clip.
Push the center pin until the pin flush with the outer
casing.
SEAT COWL INSTALLATION
2-4
Remove the following:
- Seat (page 2-5)
- Grab rails (page 2-5)
Install the seat cowl onto the seat as shown.
Install the rear cowl covers onto the grab rail
mounting holes.
Install the seat {page 2-5).
o~ .
·~
'
~
~
..
~
~~ ~
SEAT
SEAT COWL
REAR COWL COVERS