Honda INTERCEPTOR 2002 Service Manual page 456

Remove the shock absorber upper mounting nut
and the shock absorber/upper bracket assembly.
Remove the shock absorber upper mounting bolt/
nut, then remove the shock absorber upper bracket.
INSPECTION
Check the damper unit, reservoi r hose and reservoir
for leakage or other damage.
Check the upper joint bushing for wear or damage.
Replace the shock absorber assembly if necessary.
Remove the lower joint pivot collar.
Check the needle bearing, pivot collar and dust
seals for wear or damage.
NEEDLE BEARING REPLACEMENT
Remove the pivot collar and dust seals.
REAR WHEEL/SUSPENSION
DAMPER
DUST SEALS
14-27