Honda INTERCEPTOR 2002 Service Manual page 163

FUEL SYSTEM (Programmed Fuel Injection)
5-28
3. No.2 Injector Short Circuit Inspection
Check for continuity between the No.2 injector
and ground.
Connection: Black/white (+) - Ground (-)
Is there continuity?
YES - Faulty No.2 injector.
NO - GO TO STEP 4.
4. No.2 Injector Power Input Line Inspection
Turn the ignition switch ON.
Measure the voltage between the No. 2 injector
connector of the wire harness side and ground.
Connection: Black/white (+)-Ground (-)
Standard: Battery voltage
Does battery voltage exist?
No - Open or short circuit in Black/white
wire.
YES - GO TO STEP 5.
5. No.2 Injector Resistance Inspection at ECM
Turn the ignition switch OFF.
Connect the No. 2 injector connector.
Disconnect the ECM connectors.
Connect the test harness to the wire harness
connectors.
Measure the resistance at the test harness termi-
nals.
Connection: A11 (-)- B12 (+)
Standard: 9- 15
n
(20 °C/68 °F)
Is the resistance within 9- 15
n
(20 °C/68 ° F)7
NO - Open or short circuit in Black/white and/
or Red/yellow wire.
YES - GO TO STEP 6.
No.2 INJECTOR 2P CONNECTOR
No.2 INJECTOR 2P CONNECTOR
\
ECM
(LLI
i
c
I I I I
o
I « II I
1
i I 4 I I 1
j
LILlLUJ