Honda INTERCEPTOR 2002 Service Manual page 397

FRONT WHEEL/SUSPENSION/ STEERING
Remove the handlebar weight from the inner
weight.
Discard the retainer.
Install the new retainer onto the inner weight.
Install the handlebar weight onto the inner weight
aligning its boss with the slot in the handlebar
weight.
Install a new mounting screw.
INNER WEIGHT
HANDLEBAR WEIGHT
rb,~
$1
RETAINER RING '
Insert the handlebar weight assembly into the han-
r--- - - - -- - - - - - - ------,
dlebar. RETAINER TAB RETAINER RING
Turn the handlebar weight and hook the retainer tab
with the hole in the handlebar.
Install the spacer onto the left handlebar.
Apply Honda Bond A or Honda Hand Gri p Cement
(U.S.A. only) to the inside of the grip and to the
clean surfaces of the left handlebar and throttle grip.
Wait 3 - 5 minutes and install the grip.
Allow the adhes1ve
Rotate the grip for even application of the adhesive.
to dry for an hour
before usmg.
13-8
HANDLEBAR WEIGHT