Honda INTERCEPTOR 2002 Service Manual page 80

FRAME/ BODY PANELS/EXHAUST SYSTEM
Always replace the
Install the new exhaust pipe gaskets onto the rear
exhaus t pipe gas-
exhaust ports of the cylinder head.
kets with new
Install the rear exhaust pipes, temporarily install the
ones.
rear exhaust pipe joint special nuts but do not
tighten them yet.
Always replace the
Install the new exhaust pipe gaskets onto the front
exhaust pipe gas-
exhaust ports of the cylinder head.
kets with new
ones.
Route and install the front exhaust pipe into the cen-
ter stand.
Temporarily install the front exhaust pipe joint spe-
cial nuts but do not tighten them yet.
Install the mounting rubbers, insulated washers and
collars into the exhaust pipe mounting bracket.
Set the front exhaust pipe onto the frame bracket
and then install the mounting bolt and nut.
MOUNTING RUBBERS
INSULATED WASHERS
2-31