Honda INTERCEPTOR 2002 Service Manual page 283

CYLINDER HEAD/ VALVES
Remove the SH bolts and water joints from the front
and rear cylinder heads.
Remove the two 6 mm flange bolts.
Loosen the 9
mm Remove the six 9 mm special bolts/washers.
bol!s in a criss-
Remove the cylinder head.
cross
pattern
in
2-
3 steps.
8-20
Remove the gasket and dowel pins.
Remove the oi l through collar and 0 -r ing.
Remove the right crankcase cover (page 9-14) and
ignition pulse generator rotor (page 19-11 ).
Remove the flange bolt and front cam chain guide
and collar.
Remove the f lange bolt, front cam chain tensioner
and collar.
Remove the front cam chain.