Apply
molybdenum
oil solution to the crankpin
bearing surfaces.
Install the bearing
cap.
Insure that
the
marks on t
he
caps
are
aligned with
the marks on
the
connecting
rods.
Apply
oil
to the
connecting rod bearing cap nut
threads
and seating surfaces.
Install
the
connecti
ng rod
nuts
and
tighten the nuts
gradually and alternately, then
tighten them
to the
specified torque.
TORQUE:
33
N·m (3.4
kgf·m, 25 lbf·ft)
CRANKSHAFT
/ PISTON/
CYLINDER
12-17