Horn - Honda INTERCEPTOR 2002 Service Manual

LIGHTS/ METERS/ SWITCHES
HORN
20-26
INSTALLATION
Install the side stand switch by aligning the switch
pin with the side stand hole and the switch groove
with the return spring holding pin.
Secure the side stand switch with a new bolt.
TORQUE: 10 N·m (1.0 kgf·m, 7 lbf·ft)
Connect the side stand switch 2P {Green) connector.
Disconnect the wire connectors from the horn.
Connect the 12V battery to the horn terminal
directly.
The horn is normal if it sounds when the 12 V bat-
tery is connected across the horn terminals.
SIDE STAND SWITCH
SIDE STAND SWITCH
12V BATIERY