Honda INTERCEPTOR 2002 Service Manual page 221

FUEL SYSTEM (Programmed Fuel Injection)
Inspection
Remove the bypass control solenoid valve.
Check that the air should flow (A) to (B). only when
the 12V battery is connected to the bypass control
solenoid valve terminal.
Check the resistance between the terminals of the
bypass control solenoid valve.
STANDARD: 28- 32
Q
(20 °C/68 °F)
If the resistance is out of specification, replace the
bypass control solenoid valve.
ONE-WAY VALVE
Removal/Installation
Remove the air cleaner housing (page 5-60).
Disconnect the vacuum hose and the one-way
va lve.
Route the vacuum
Installation is in the reve rse order of removal.
hoses correctly
5-86
Inspection
Check the one-way valve operation as follows:
- Air shou ld flow (A) to (B)
Air should flow (A) to (C)
- Air should not flow (B) to (A)
Air should not flow (B) to (C)
If the operation is incorrect, re place the one-way
valve.
(A)
BYPASS CONTROL SOLENOID VALVE
ONE-WAY VALVE