Honda INTERCEPTOR 2002 Service Manual page 367

CRANKCASE/ TRANSMISSION
Install the mainshaft and countershaft by aligning
the countershaft bearing groove with the set ring on
the crankcase, and aligning the bearing cap holes
with the dowel pins.
Also align the countershaft bearing stopper pin with
the groove in the crankcase.
Install the shift drum and shift drum bearing into the
lower crankcase.
The shift fo rks have location ma rks.
- "R" fo r right
- "C" for center
- "L" for left
Face the shift fork
Install the shift forks and shift fork shaft.
identification marks
ro the clutch s1de.
11-12
"C" SHIFT FORK