Honda INTERCEPTOR 2002 Service Manual page 165

FUEL SYSTEM (Programmed Fuel Injection)
5-30
2. No.3 Injector Resistance Inspection
Turn the ignition switch OFF.
Disconnect the No.3 injector 2P connector and
measure the resistance of the No.3 injector 2P
connector termi na ls.
Connection: Black/white(+)- Pink /green (-)
Standard: 10.5- 14.5
Q
(20 °C/68 °F)
Is the resistance within 10.5- 14.5
Q
(20 °C/68
O F)?
NO - Faulty No.3 injector.
YES - GO TO STEP 3.
3. No.3 Injector Short Circuit Inspection
Check for continuity between the No.3 injector
and ground.
Connection: Black/white(+)- Ground (-)
Is there continuity?
YES - Faulty No.3 injector.
NO - GO TO STEP 4.
4. No.3 Injector Power Input Line Inspection
Turn the ignition switch ON.
Measure the voltage between the No. 3 injector
connector of the wire harness side and ground.
Connection: Black/white(+)- Ground (-)
Standard: Battery voltage
Does battery voltage exist?
No - Open or short circuit in Black/whi te
wire.
YES - GO TO STEP 5.
5. No.3 Injector Resistance Inspection at ECM
Turn the ignition switch OFF.
Connect t he No.3 i njector connector.
No.3 INJECTOR 2P CONNECTOR
No.3 INJECTOR 2P CONNECTOR
CJ
®
No.3 INJECTOR 2P CONNECTOR
\
CJ
0
No.4 INJECTOR 2P CONNECTOR