Honda INTERCEPTOR 2002 Service Manual page 182

FUEL SYSTEM {Programm ed Fuel Injection )
Disconnect the ECM connect o rs.
Con nect the test harness to the wire harness
connectors.
Measure the voltage at t he test ha rn ess termi-
nals.
Connection: B12 (+) - B4 (-)
Standard: Battery voltage
Is the battery voltage exist?
NO - Open circuit in Black/white w ire
between the ECM connecto r and No.2
02 sensor 4P (Black) connect o r.
YES - Replace the ECM w it h a new one, and
inspect it again.
PGM-FI MIL 27 BLINKS (VTEC soleno id valve)
1. VTEC Solenoid Valve Connection Inspection
Turn the ignition swit ch O FF.
Disconnect the VTEC sole noid valve con necto r.
IGN ITI ON SWI TCH
CONN ECTOR
5-47