Honda INTERCEPTOR 2002 Service Manual page 212

FUEL SYSTEM (Programmed Fuel Injection)
Adjust the idle speed if the idle speed differs from
the specified speed.
IDLE SPEED: 1,200
±
100
rp m
Remove the vacuum gauge from the vacuum hoses.
Connect the each cylinder vacuum hose to the 5-
way joint.
Reset the ECM self diagnosis data (page 5-8).
MAP SENSOR
OUTPUT VOLTAGE INSPECTION
Connect the test harness to the ECM (page 5-9).
Measure the voltage at the test harness terminals
{page 5-1 0).
Connection: A4 (+ )- 816 (-)
STANDARD: 2.7-3.1 V
The MAP sensor output voltage (above) is mea-
sured under the standard atmosphere (1 atm
=
1,030 hPa).
The MAP sensor o utput voltage is affected by the
distance above sea level, because the output volt-
age is changed by atmosphere.
Check the sea level measurement and be sure that
the measured voltage falls within the specified
value.
C VI
3.5
3.1
3.0
2.7
2.5
2.0
1.5
1.0
0.5
2.5
2.1
0 500 1,000 1..500 2,000
:m
(1.6501 (3.3001 (4 ,9501 (6,600) (feel)
5-77