Honda INTERCEPTOR 2002 Service Manual page 593

ELECTRIC STARTER/ STARTER CLUTCH
CONTINUITY INSPECTION
Connect an ohmmeter to the starter relay switch
large terminals.
Turn the ignition switch to "ON" and the engine stop
switch to "RUN".
Check for continuity between the starter relay
switch terminals.
There should be continuity when the ignition switch
is turned to "ON" and the engine stop switch to
"RUN".
STARTER RELAY SWITCH
DIODE
19-18
REMOVAL
Remove the upper cowl cover (page 2-12).
Open the fuse box and remove the diode.
INSPECTION
Check for continuity between the diode terminals.
When t here is continuity, a sma ll resistance value
will register. DIODE
If there is continuity, in one direction, the diode is
normal.
INSTALLATION
A
Install the diode in the reverse order of removal.
B
8
~[ ~I
r
I~
h