Honda INTERCEPTOR 2002 Service Manual page 417

FRONT WHEEL/SUSPENSION / STEERING
13-28
Screw the damper rod lock nut down fully by hand.
Install the spring seat stopper.
Install a new 0-ring onto the fork bolt.
Apply fork fluid to the new 0-ring.
Hold the damper rod and screw the fork bolt onto
the damper rod unti l it seats on the damper rod lock
nut.
Hold the fork bolt and tighten the lock nut to the
specified torque.
TORQUE: 20 N·m (2.0 kgf·m, 14 lbf·ft)
Screw the fork bolt into the fork pipe.
~~CIJ
0 -RING
--jill
PUSH ROD
FORK BOLT
/
FORK BOLT
/
FORK BOLT
/