Throttle Body - Honda INTERCEPTOR 2002 Service Manual

FUEL SYSTEM {Programmed Fuel Injection)
Route the wires
Inst all t he air cleaner housi ng in the reverse order of
and vacuum hoses
removal.
properly (page 5-
61}.
THROTTLE BODY
REMOVAL
I
NOTICE
• Bending or twisting the control cables w ill impair
smooth operation and could cause the cables to
stick or bind, resulting in loss of vehicle control.
• Before disconnecting the fuel hose, release the
fuel pressure by loosening the fuel hose banjo
bolt.
• Always replace the sealing washer when the fuel
hose banj o bolt is removed or loosened.
Drai n the coolant from the cooling system (page 6-
6).
Remove the fo llowing:
- Fuel tank (page 5-56)
- Air c leaner housing (page 5-60)
Remove the throttle stop screw knob from the cable ,.
stay.
Disconnect the throttle body sub-harness l OP (Gray)
co nnect or.
5-63