Honda INTERCEPTOR 2002 Service Manual page 259

ENGINE REMOVAL/INSTALLATION
Install the direct ignition coils to the f ront cylinder
head, t ighten t he bolts securely.
Install the PAIR air hose and PAIR solenoid valve
assembly.
Connect the PAIR air hose to the fro nt cylinder head
cover.
Install the direct ignit ion coils to the rear cylinder
head, tighten t he bolts securely.
Connect t he PAIR air hose to the rear cyli nder head.
Install the right and left ra diator as an assembly
.----=--- ---.BJ"IfH>-
7-12
(page 6-13).
Route the starter m otor cable and connect to the
starter motor t erminal.
Tighten the terminal nut securely.
Install the o il cooler assembly.
Install and t ighten the oil co oler mounting bolts
securely.
Install new 0-rings to the oil cooler hose joints.
Install the oil cooler hose joi nt s to the oil pan,
tighten the bolt securely.
BOLT
OIL COOLER HOSE