Honda INTERCEPTOR 2002 Service Manual page 445

REAR WHEEL/ SUSPENSION
Install the washers
with their cham-
fered s1de facing
the driven sprocket.
14-16
Install t he damper rubbers and distance collar into
the d ri ven sprocket hub.
Install the distance collar.
Apply grease t o a new 0 -ring and install it onto the
driven flange.
Install the d riven f lange onto the driven sprocket
hub.
Apply grease to the dust seal lips, install it into the
driven sprocket hub.
Insta ll the collar.
Insta ll the drive n sprocket onto the hu b.
Insta ll t he wa shers and mounting bolts/nuts.
Tighten t he nut to the specif ied torq ue.
TORQUE: 64 N·m (6.5 kgf·m, 47 lbf.ft)
DISTANCE COLLAR
DAMPER RUBBERS
SPROCKET HUB DRIVEN FLANGE
\
-~ DUSTSEAL COLLAR
BO LTS/NUTS
DRIVEN SPROCKET