Honda INTERCEPTOR 2002 Service Manual page 479

HYDRAULIC BRAKE
Connect a commercially available air bleed tool to
the servo proportional contro l valve air bleed valve.
Operate THE air bleed tool and loosen the bleed
va lve, adding f luid when the f lu id level in the master
cylinder reservoir is low.
Close the bleed valve.
TORQUE: 8 N·m (0.8 kgf·m, 5.8 lbf.ft)
SERVO PROPORTIONAL CONTROL
VA~
A IR BLEED VALVE
Servo brake line (rear proportional control valve-to-rear brake caliper)
15-12
SERVO
(Of~:=;~==~
PROPORTIONAL
CONTROL VALVE
Connect a commercially available air bleed tool to
the rear brake caliper center air bleed valve.
Operate the air bleed tool and loosen the center
bleed valve, adding fluid when the fluid level in the
master cylinder reservoir is low.
Close t he bleed va lve.
TORQUE: 6 N·m (0.6 kgf·m, 4.3 lbf.ft)
REAR BRAKE CALIPER
CENTER BLEED VALVE