Honda INTERCEPTOR 2002 Service Manual page 426

FRONT WHEEL/ SUSPENSION/ STEERING
Temporarily instal l the steering stem nut onto the
stem to prevent the threads from being damaged
when removing the lower bearing inner race from
the stem.
Remove the lower bearing inner race with a chisel
or equivalent tool , being careful not to damage the
stem.
Remove the dust seal.
Apply grease to a new dust seal lips and instal l it
over the steering stem.
Install a new lower bearing in ner race usi ng a spe-
cial tool and a hydraulic press.
TOOL:
Steering stem driver
07946-MBOOOOO
INSTALLATION
:BEARINGS
~
: BEARING RACE
~
:DUSTSEAL
STEM NUT CAP
~
STEM NUT \
TOP BRIDGE
UPPER BEARING
UPPER OUTER RACE
DUST SEAL
~
e
LOWER INNER RACE
-
S TEERING STEM DRIVER
LOWER OUTER RACE
LOWER BEARING
' I I
LOWER INNER RACE
f~/
LOWER DUST SEAL
~ ~ ~
@(
STEERING STEM
13-37