Brake Light Switch; Clutch Switch - Honda INTERCEPTOR 2002 Service Manual

LIGHTS/ METERS/ SWITCHES
BRAKE LIGHT SWITCH
FRONT
Disconnect the front brake light switch connectors
and check for continuity between the terminals.
There should be continuity with the brake lever
applied, and there should be no continuity with the
brake lever released.
REAR
Remove the seat (page 2-5).
Remove the trim clips and left seat rail cover.
Disconnect the rear brake light switch 2P (Natural)
connector and check for con tinuity between the ter-
minals.
There should be continuity with the brake pedal
applied, and there should be no continuity with the
brake pedal released.
CLUTCH SWITCH
20-24
Disconnect the clutch switch connectors.
There should be continuity with the clutch lever
applied, and there should be no continuity with the
clutch lever released.