Honda INTERCEPTOR 2002 Service Manual page 396

FRONT WHEEL/SUSPENSION/STEERING
Remove the stop ring from t he fork p ipe.
Loosen th e left handleba r pinch bolt and remove the
handlebar.
LEFT HANDLEBAR INSTALLATION
Insta ll t he left hand lebar onto the fork pipe, aligning
its boss with the groove in the f ork top bridge.
Tighten the handlebar pinch bolt to t he specified
torque.
TORQUE: 26 N·m (2.7 kgf·m, 20 lbf·ft)
Install the st op ring into t he fo rk pipe groove.
Handlebar Weight Replacement
Remove the grip from the handlebar.
Straighten the weight retainer tab with a screw-
driver or punch.
Apply lubricant
Temporaril y install the handlebar weight and screw,
spray through the
then remove the hand lebar weight assembly by
tab locking hole to
turnin g the grip end.
che rubber for easy
removal.
RETAINER TAB
RUBBER CUSH ION
INNER W EIGHT
RETAINER HOLE
RETAINER RING
13-7