Honda INTERCEPTOR 2002 Service Manual page 255

ENGINE REMOVAL/ INSTALLATION
7-8
Remove the oil cooler hose joint mounting bolts.
Remove the mounting bolts and oil cooler assem-
bly.
Disconnect the radiator sub-harness 2P (Black) con-
nector.
Remove the SH bolts and radiator lower stays.
Remove the radiator mounting bolts and remove
the right and left radiator as an assembly.
Remove the starter motor mounting bolt and starter
motor ground cable.
Disconnect the PAIR control solenoid valve 2P (Nat-
ural) connector.
Disconnect the PAIR air hose from the rear cylinder
head cover.
Remove the bolts and ignition coils from the rear
cylinder head cover.
Disconnect the PAIR air hose from the front cylinder
head cover, then remove the PAIR solenoid valve
assembly.
Remove the mounting bolts and oil cooler assem-
bly.
Remove the bolts and ignition coils from the front
cylinder head cover.
BOLT
OIL COOLER HOSE
J
DIRECT IGNITION COILS
-