Honda INTERCEPTOR 2002 Service Manual page 93

MAINTENANCE
3-10
Remove the VTEC side outer valve springs.
Reinstal l the slide pin holder/valve lifter into VTEC
side valve lifter bore.
Reinstall the following:
- Front camshaft (page 8-37)
- Rear camshaft (page 8-42)
Remove the timing hole cap and 0 -ring.
Turn the crankshaft clockwise, align the "1T" mark
on the ignition pulse generator rotor with the index
mark on the right crankcase cover.
Make sure that the No.1 piston is at TDC (Top Dead
Center) on the compression stroke.