Honda INTERCEPTOR 2002 Service Manual page 251

ENGINE REMOVAL/INSTAllATION
SERVICE INFORMATION
GENERAl
• A hoist or equivalent is required to support the motorcycle when removing and installing the engine.
• A floor jack or other adjustable support is required to support and maneuver the engine.
I
NOTICE
I
Do not use the oil filter as a jacking point.
• The following components can be serviced with the engine installed in the frame.
- Alternator (page 17-1
O)
- Clutch (page 9-15)
- Cylinder head/valves (page 9-11)
- Gearshift linkage (page 1
0-5)
-Oil cooler (page 4-14)
-Oil pump (page 4-8)
- Water pump (page 6-18)
• The following components require engine removal for service.
- Crankcase/transmission (page 11-5)
- Crankshaft/piston/cylinder (page 12-4)
SERVICE OAT A
ITEM
Engine dry weight
Engine oil capacity I
After disassembly
Coolant capacity Radiator and engine
TORQUE VALUES
Engine hanger f lange nut (front)
Engine hanger flange bolt (rear)
Engine hanger flange bolt (middle)
Shock absorber lower bra cket flange
cap nut (lower)
Shock absorber lower bracket flange
nut (upper)
Drive sprocket special bo lt
7-4
54 N·m (5.5 kgf·m, 40 lbf.ft)
44 N·m (4.5 kgf·m, 33 lbf·ft)
44 N·m (4.5 kgf·m, 33 lbf·ft)
39 N·m (4.0 kgf·m, 29 lbf·ft)
42 N·m (4.3 kgf·m,31 lbf ·ft)
51 N·m (5.2 kgf·m, 38 lbf·ft)
SPECIFICATIONS
72.4 kg (159.6 lbs)
3.8 liter (4.0 US qt, 3.3 Imp qt)
2.92 liter (3.08 US qt, 2.57 Imp qt)
U-nut