Honda INTERCEPTOR 2002 Service Manual page 405

FRONT WHEEL/ SUSPENSION/ STEERING
Never msta/1 the old
bearings. Once the
bearings have been
removed, the bear-
Drive i n a new r ig ht bearing squarely.
Install the distance col lar, then drive in the left bear-
ing using the special tool.
TOOLS:
mgsmust be
replaced with new
Driver
ones
Attachment, 42 X 47 mm
Pilot, 20 mm
07749-0010000
07746-0010300
07746-0040500
Do not get grease
Instal l the brake discs on the wheel hub.
on the brake drscs
Install and t ighten the new mounting bolts to the
or stopping power
specified torque.
will be reduced.
TORQUE: 20 N ·m (2.0 kgf·m, 14 lbf·ft)
Apply grease to the dust seal lips, then install them
into the wheel hub.
ABS type only:
Apply a locking agent t o the front pulser ring
mounting bolt threads.
13-16
Install the front pulser ring onto the right brake disc.
then tighten the bolts to the specified t orque.
TORQUE: 7 N·m (0.7 kgf·m, 5.1 lbf·ft)
INSTALLATION
Install the side collars.