Honda INTERCEPTOR 2002 Service Manual page 399

FRONT WHEEL/SUSPENSION/STEERING
13-10
Install the throttle pipe into the right handlebar
switch housing/throttle housing.
Apply grease to the sliding surface of the throttle
pipe.
Install the throttle pipe on the right handlebar.
Install the right handlebar onto the fork pipe while
aligning its boss with the groove of the top bridge.
Make sure the handlebar is seat ed on the top
bridge.
Tighten the handlebar pinch bolt to t he specified
torque.
TORQUE: 26 N·m
(2.7
kgf·m, 20 lbf·ft)
Install the stop ring into the fork pipe groove.
Install the right handlebar switch/throttle housing
by aligning its locating pin with the hole in the han-
dlebar.
HANDLEBAR
THROTILE PIPE