Honda INTERCEPTOR 2002 Service Manual page 352

Install the return spring, washer, stopper arm and
pivot bolt.
Tighten the pivot bolt to the specified torque.
TORQUE: 12 N·m (1.2 kgf·m, 9 lbf·ft)
Install two washers onto the gearshift spindle.
Install the gearshift spindle aligning its return spring
ends with the return spring pin onto the crankcase.
Install the dowel pin and new gasket.
Install the gearshift linkage cover.
Apply sealant to the two 6 X 22 mm SH bolt threads.
Install the two 6 X 22 mm SH bolts and four 6 X 28
mm SH bolts.
Tighten the SH bolts securely.
GEARSHIFT LINKAGE
10-9